Assembly and transport of lightweight marquees

We take care of the transport of your lightweight marquee to the place of assembly – across the whole of Europe. Subsequently, our assembly teams completely assemble the marquee with all accessories so that it is ready for use.

Assembly of the support frame of a lightweight marquee with the mobile crane

Assembly of the support frame of a marquee with 20 m width and 6.40 m eave height with a mobile crane

Insertion of the roof purlins of an industrial tent

Insertion of the purlins in the support frame of a lightweight marquee

We take care of the complete assembly of your marquee – from the transport, to the marquee assembly, the installation of doors, gates and windows or the suspension of lighting right through to the laying of the floor. Don’t worry – your marquee is in capable hands. Our supervisors and technicians will ensure that everything runs smoothly.

The marquees are anchored with steel baseplates with earth pins (up to 1.35 m in length) or in concrete foundations with plugs. Foundations are generally not required.

The frames are already completely assembled on the ground. Erecting your marquee is not a problem. A special joint point on the baseplate makes this super easy. Depending on the marquee size, the frames are erected using a forklift truck, a telescopic crane or a mobile crane. Standardised modular elements make the assembly extremely easy. So easy that it can even be carried out by your employees if they are instructed by a supervisor.

But what if the substrate is uneven? No problem. We’ll simply balance it out with underpinning – of course, even this has its limitations. Assembly on a fixed substrate such as gravel, asphalt, composite paving or concrete is child’s play. An evenly ascending site with a gradient of up to 1% is no problem for our marquee system. For greater gradients, we can shorten our support lengths. Of course, this results in non-standard marquee heights.

Unverbindliches Angebot